AISI 1030
Carbon steels are those that have carbon as the main alloying element. They also contain up to 0.4% silicon and 1.2% manganese. In addition, the residual elements such as copper, molybdenum, aluminium, chromium and nickel are present in these steels. The AISI 1030 steel is a high carbon steel, and has moderate strength and hardness in the as-rolled condition. It can be hardened and strengthened by cold work. It also has fair machinability, ductility and good weldability.
| Element | Content(%) |
|---|---|
| Iron, Fe | 98.67-99.13 |
| Manganese, Mn | 0.60-0.90 |
| Carbon, C | 0.270-0.340 |
| Phosphorous, P | ≤ 0.040 |
| Sulfur, S | ≤ 0.050 |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength, ultimate | 525 MPa | 76100 psi |
| Tensile strength, yield | 440 MPa | 63800 psi |
| Modulus of elasticity | 190-210 GPa | 29700-30458 ksi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80 GPa | 11600 ksi |
| Poissons ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 12% | 12% |
| Reduction of area | 35% | 35% |
| Hardness, Brinell | 149 | 149 |
| Hardness, Knoop (converted from Brinell hardness) | 169 | 169 |
| Hardness, Rockwell B (converted from Brinell hardness) | 80 | 80 |
| Hardness, Vickers (converted from Brinell hardness) | 155 | 155 |
| Machinability (based on AISI 1212 steel. as 100 machinability) | 70 | 70 |
Sheets / Plates
| Production Route | Hot Rolled, Cold Rolled |
| Material Standard | AISI, ASTM, ASME, DIN, BS, EN, ISO, JIS, GOST, SAE, IS & Custom Chemistry |
| Size | Width from 100mm to 3000mm ; Length from 500mm to 12000mm |
| Thickness | 0.1mm to 400mm |
| Delivery Condition | As Rolled, Annealed, Quenched and Tempered, Normalized |
| Surface Finish | Plain, Brushed, Cladded |
AISI 1030 Equivalent Grade / Specifications
- ASTM A29(1030)
- ASTM A510(1030)
- ASTM A512(1030)
- ASTM A513(1030)
- ASTM A519(1030)
- ASTM A544(1030)
- ASTM A545(1030)
- ASTM A546(1030)
- ASTM A576(1030)
- ASTM A682(1030)
- ASTM A830(1030)
- MIL S-11310 (CS 1030)
- FED QQ-S-700(C1030)
- SAE J1397 (1030)
- SAE J403(1030)
- SAE J412(1030)
- DIN 1.1172
- UNI CB 35
- ASTM A108
- FED QQ-S-635