AISI 1117
Carbon is the main alloying element found in carbon steels. Chromium, nickel, copper, molybdenum, and aluminium are present in small quantities. These steels contain 0.4% of silicon and 1.2% of manganese. AISI 1117 carbon steel contains more manganese than other lower-carbon steels in order to ensure good hardenability.
| Element | Content(%) |
|---|---|
| Iron , Fe | 98.33 - 98.78 |
| Manganese, Mn | 1.0 - 1.30 |
| Carbon, C | 0.14 - 0.20 |
| Sulfur, S | 0.080 - 0.13 |
| Phosphorous, P | 0.040 |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 475 MPa | 68900 psi |
| Yield strength (depending on temper) | 400 MPa | 58000 psi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80.0 GPa | 11600 ksi |
| Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 15% | 15% |
| Reduction of area | 40% | 40% |
| Hardness, Brinell | 137 | 137 |
| Hardness, Knoop (converted from Brinell hardness) | 156 | 156 |
| Hardness, Rockwell B (converted from Brinell hardness) | 75 | 75 |
| Hardness, Vickers (converted from Brinell hardness) | 143 | 143 |
Sheets / Plates
| Production Route | Hot Rolled, Cold Rolled |
| Material Standard | AISI, ASTM, ASME, DIN, BS, EN, ISO, JIS, GOST, SAE, IS & Custom Chemistry |
| Size | Width from 100mm to 3000mm ; Length from 500mm to 12000mm |
| Thickness | 0.1mm to 400mm |
| Delivery Condition | As Rolled, Annealed, Quenched and Tempered, Normalized |
| Surface Finish | Plain, Brushed, Cladded |