AISI 1547
Carbon steels contain carbon as the primary alloying element. In addition to this, they also contain some residual elements such as chromium, molybdenum, nickel, aluminium, and copper. About 0.4% silicon and 1.2% manganese are also present in these steels. The AISI 1547 carbon steel is suitable for forgings.
| Element | Content(%) |
|---|---|
| Iron, Fe | 97.75 - 98.22 |
| Manganese, Mn | 1.35 - 1.65 |
| Carbon, C | 0.430 - 0.510 |
| Sulfur, S | ≤ 0.050 |
| Phosphorous, P | ≤ 0.040 |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 710 MPa | 103000 psi |
| Yield strength | 605 MPa | 87700 psi |
| Bulk modulus (typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (typical for steel) | 80 GPa | 11600 ksi |
| Elastic modulus | 190-210 GPa | 27557-30458 ksi |
| Poisson's ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break | 10% | 10% |
| Reduction of area | 28% | 28% |
| Hardness, Brinell | 207 | 207 |
| Hardness, Knoop (converted from Brinell hardness) | 229 | 229 |
| Hardness, Rockwell B (converted from Brinell hardness) | 93 | 93 |
| Hardness, Rockwell C (converted from Brinell hardness. Value below normal HRC range, for comparison purposes only) | 15 | 15 |
| Hardness, Vickers (converted from Brinell hardness) | 217 | 217 |
| Machinability (based on 100 machinability for AISI 1212 steel) | 40 | 40 |
Sheets / Plates
| Production Route | Hot Rolled, Cold Rolled |
| Material Standard | AISI, ASTM, ASME, DIN, BS, EN, ISO, JIS, GOST, SAE, IS & Custom Chemistry |
| Size | Width from 100mm to 3000mm ; Length from 500mm to 12000mm |
| Thickness | 0.1mm to 400mm |
| Delivery Condition | As Rolled, Annealed, Quenched and Tempered, Normalized |
| Surface Finish | Plain, Brushed, Cladded |