AISI 4140 Sheets Plates Suppliers, AISI 4140 Sheets Plates stockist.
AISI 4130 sheets plates Suppliers in India, AISI 4130 sheets plates stockist in India.
Alloy Steel 4140 Sheets & Plates Supplier | UNS G41400 Sheets & Plates | ASTM A829 & 4140 Steel Plate Aisi 4140 UNS G41400 Sheets Exporter | Alloy Steel UNS G41400 Plates | Steel G41400 Sheets Plates | ASTM A829 & 4140 Steel Plate Supplier
Anand Steels are one of the conspicuous maker of Alloy Steel 4140 Sheets and Plates. AISI 4140 Alloy Steel 4140 Sheets and Plates low compound steel containing Chromium and Molybdenum is the most by and large used mix for oil fix applications. By and large provided in the cemented and tempered condition at 22 HRC max. it furthermore finds bolster in various applications requiring higher quality levels up to 150 KSI 0.2% PS. The assessment is not NACE MR0175 asserted in these conditions, and should not be used as a piece of circumstances containing H2S.
Alloy Steel 4140 Sheets and Plates is extensively used
as a piece of tubular structure for downhole devices. Alloy Steel 4140 Sheets And
Plates, Alloy Steel 4140 Sheets And Plates Exporter, Alloy Steel 4140 Sheets And
Plates Supplier, Alloy Steel 4140 Sheets And Plates Manufacturer, Alloy Steel 4140
Sheets And Plates Producers.ASTM A331, AISI 4140, Alloy 4140 Steel Suppliers, AISI
4140 Alloy Steel (UNS G41400), ASTM A829 and 4140 Steel Plate, AISI 4140, UNS
G41400.
A couple of mutt examination are available all considering the AISI science. The
most broadly perceived change is to construct the Molybdenum level at 35% max on
separations over, normally more conspicuous than 6". Extending Molybdenum improves
the hardenability of Alloy Steel 4140 Sheets and Plates.
The hardenability limitations of this assessment (significance to which it will
set/get the foreordained mechanical properties after warmth treatment) of Alloy
Steel 4140 Sheets and Plates ought to constantly be considered when arranging and
choosing equipment.
CHEMICAL COMPOSITION OF Alloy Steel 4140 Sheets Plates Supplier
| C | Si | Mn | P | S | Cr | Mo | Fe | |
|---|---|---|---|---|---|---|---|---|
| Min | 0.38 | 0.15 | 0.75 | • | • | 0.80 | 0.15 | 0.00 |
| Max | 0.43 | 0.35 | 1.00 | 0.035 | 0.040 | 1.10 | 0.25 | 0.00 |
MECHANICAL PROPERTIES OF Alloy Steel 4140 Sheets Plates Supplier
Condition: Hardened and Tempered to 22 HRC max
| U.T.S | 100 KSI Min | (689 N/mm2) |
|---|---|---|
| 0.2% Proof Stress | 80 KSI Min | (551 N/mm2) |
| Elongation | 20 % | |
| Red of Area | 40 % |
Condition: Hardened and Tempered to 30-36 HRC max
| U.T.S | 130 KSI Min | (896 N/mm2) |
|---|---|---|
| 0.2% Proof Stress | 110 KSI Min | (758 N/mm2) |
| Elongation | 13 % | |
| Red of Area | 30 % |
THERMAL PROPERTIES OF Alloy Steel 4140 Sheets Plates Supplier
| Thermal Conductivity (W/m-K) | 42.7 |
|---|---|
| Thermal Expansion (10-6/ºC) | 12.3 |
| Specific Heat (J/kg-K) | 473 |
APPLICATIONS OF Alloy Steel 4140 Sheets Plates Supplier
AISI 4140 is commonly used for a variety of applications in the oil and gas sector. Typical applications include components such as connection rods, collets, conveyor pins, gears, stem assemblies, pump shafts and tool holders.
Focus Countries:
Singapore, Malaysia, Vietnam, Myanmar, Bangladesh, Srilanka , Saudi Arabia, Oman,Qatar,Kazakhstan,Turkmenistan,Jordon,Dubai,Italy,Germany,Turkey,Egypt,Australia, Nigeria,niger,Algeria,Namibia,Iran,Bahrain,Peru,Chile,USA,southAfrica,Kenya,Venezuela, Zimbabwe, Mexico, Indonesia,Thailand, Bangkok,UK,Australia, NewZealand,Poland,Finland, Brazil,Angola.