Structural Steel EN 10025-2 S355J0 Sheet Plates Suppliers, Structural Steel EN 10025-2 S355J0 Sheet Plates Stockist.
Structural Steel EN 10025-2 S355J0 Sheet Plates Suppliers in India, Structural Steel EN 10025-2 S355J0 Sheet Plates Stockist in India.
Structural Steel EN 10025-2 S355J0 Sheet Plates Stockist & Suppliers, Structural Steel EN 10025-2 S355J0 Sheet Plates Stockist & Suppliers in India.
Structural Steel EN 10025-2 S355J0 Sheet Plates, EN 10025-2 S355J0|S355J0 steel plate, S355J0 Supplier
| Anand steels : |
S355J0(1.0553) |
|---|---|
| Specification: |
Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm |
| Standard: |
EN 10025 - 2 : 2004 Technical delivery conditions for non-alloy structural steels |
| Approval By Third Party |
ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE |
| Classification: |
non-alloy structural steels |
Anand Steels is specialized in supplying EN10025-2 steel plate in S355J0. For more information of steel plates, please check them in following:
Chemical composition % of the Product analysis of grade S355J0 (1.0553)
Nominal thickness =< 30(mm) CEV max = 0.45
Nominal thickness from 30 to 40 (mm) CEV max =0.47
Nominal thickness from 40 to 150 (mm) CEV max =0.47
Nominal thickness from 150 to 250 (mm) CEV max =0.49
Nominal thickness from 250 to 400 (mm) CEV max =--
| C | Si | Mn | Ni | P | S | Cr | Mo |
|---|---|---|---|---|---|---|---|
|
max 0.24 |
|
1.70 |
|
Max 0.045 |
Max 0.045 |
|
|
| V | Nb | Ti | N | Cu | |||
|
|
|
|
0.014 |
0.60 |
|
|
|
Mechanical properties of grade S355J0 (1.0553)
|
|
-150 | 150-250 | 250-400 |
|---|---|---|---|
| Minimum energy nominal thicknessTemperature(0) |
27 |
27 |
|
| Nominal thickness (mm) | to 16 | 16 - 40 | 40 - 63 | 63 - 80 | 80 - 100 | 100 - 150 | 150 - 200 | 200-250 | 250-400 |
|---|---|---|---|---|---|---|---|---|---|
| ReH - Minimum yield strength (MPa) | 355 | 345 | 335 | 325 | 315 | 295 | 285 | 275 |
| Nominal thickness (mm) | -3 | 3-100 | 100-150 | 150-250 | 250-400 |
|---|---|---|---|---|---|
| Rm -Tensile strength (MPa) | 510-680 | 470-630 | 450-600 | 450-600 |
| Nominal thickness (mm) | 3-40 | 40-63 | 63-100 | 100-150 | 150-250 | 250-400 |
|---|---|---|---|---|---|---|
|
A - Minimum elongation Lo = 5,65 √ So (%) |
22 |
21 |
20 |
18 |
17 |
|
Equivalent grades of grade S355J0 (1.0553)
| Germany DIN,WNr | France AFNOR | England BS | Spain UNE | Italy UNI | Norway |
|---|---|---|---|---|---|
|
St 52-3 N |
E 36-3 |
50 C |
AE 355 C |
Fe 510 C |
NS 12 153 |
Focus Countries:
Singapore, Malaysia, Vietnam, Myanmar, Bangladesh, Srilanka , Saudi Arabia, Oman,Qatar,Kazakhstan,Turkmenistan,Jordon,Dubai,Italy,Germany,Turkey,Egypt,Australia, Nigeria,niger,Algeria,Namibia,Iran,Bahrain,Peru,Chile,USA,southAfrica,Kenya,Venezuela, Zimbabwe, Mexico, Indonesia,Thailand, Bangkok,UK,Australia, NewZealand,Poland,Finland, Brazil,Angola.